Constant hue bands in boundary colors discovered using a new appearance model

Boundary colors are observed when light from a scene is dispersed by a prism or diffraction grating. We discovered that patterns with repeating black and white stripes can produce repeating bands of boundary colors with two hues. These hues are virtually constant as measured by chromaticity or CIELAB. We found seven cases of this kind using a new appearance model for boundary colors. The model correctly predicts that green and magenta bands recur as stripe widths and dispersion strength vary. The first green/magenta case in the sequence traces out an accurate ellipse in XYZ color space. Green and magenta bands are prominent in supernumerary rainbows and interference rings, and we explain why that might be the case. The explanation is based on an interesting property of the visible spectrum. In addition to the green/magenta cases, the other cases are orange/cyan, yellowish‐green/purple, and yellow/violet. The success of the boundary color appearance model implies that bands are perceived as if the wavelength responses of the cones were essentially independent, which contradicts the actual behavior of cones. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 135–146, 2015     

Coil‐Type Asymmetric Supercapacitor Electrical Cables

Cable‐shaped supercapacitors (SCs) have recently aroused significant attention due to their attractive properties such as small size, lightweight, and bendability. Current cable‐shaped SCs have symmetric device configuration. However, if an asymmetric design is used in cable‐shaped supercapacitors, they would become more attractive due to broader cell operation voltages, which results in higher energy densities. Here, a novel coil‐type asymmetric supercapacitor electrical cable (CASEC) is reported with enhanced cell operation voltage and extraordinary mechanical‐electrochemical stability. The CASECs show excellent charge–discharge profiles, extraordinary rate capability (95.4%), high energy density (0.85 mWh cm⁻³), remarkable flexibility and bendability, and superior bending cycle stability (≈93.0% after 4000 cycles at different bending states). In addition, the CASECs not only exhibit the capability to store energy but also to transmit electricity simultaneously and independently. The integrated electrical conduction and storage capability of CASECS offer many potential applications in solar energy storage and electronic gadgets.     

析湿工况下翅片管式换热器表面粉尘沉积过程的数值模型

空调器采用翅片管式换热器作为蒸发器，在制冷工况下换热器表面发生析湿及粉尘沉积，导致性能衰减。建立湿翅片表面粉尘颗粒物沉积过程的数学模型，模拟冷凝水捕集颗粒物以及湿积灰层黏附颗粒物的过程。被冷凝水捕集的颗粒物数量等于运动轨迹与水表面轮廓会出现相交的入射颗粒物的数量；后续的入射颗粒物与湿积灰层碰撞时，部分入射颗粒物会发生沉积且部分被碰撞的已沉积湿颗粒物会发生移除，这两部分的颗粒物数量相减即为被湿积灰层黏附的颗粒物数量。模拟与实验结果的对比表明，预测的湿积灰层形状与实验照片的吻合度较好，预测的单位面积颗粒物沉积质量与91%的实验数据之间的误差在±20%之间，平均误差为11.8%。     

Interactions between hydrogen and the (112¯1) twin boundary in hexagonal close-packed titanium

In hexagonal close-packed titanium, the interactions between the $\left(11\overline{2}1\right)$ twin boundary (TB) and hydrogen solute atoms with several different concentrations are investigated by using first-principles calculations. The preferential occupation sites of hydrogen atoms in the $\left(11\overline{2}1\right)$ TB region are searched and vary with the amount of hydrogen. Both the shift of the TB and the diffusion of hydrogen atoms, as well as the mutual effect on the movement of each other, are studied. The energy barriers of the TB shift increase with the hydrogen concentration. Additionally, the simulated tensile tests are applied for several systems with co-existing $\left(11\overline{2}1\right)$ TB and hydrogen atoms, and different geometry transformation behaviors at different hydrogen concentrations are found under the increasing tensile strain.     

焦化厂电气设备常见故障及诊断

焦化厂电气设备更新迅速、功能多样,设备结构和功能趋于复杂化,对故障诊断的精准性提出了更高要求。为保障焦化厂电气设备的正常运行,对电气设备常见故障及影响因素展开分析,探讨了电气设备故障诊断的作用和方法,并对设备维护的要点进行了论述。分析认为,电气设备运行时受诸多因素影响,为保证设备正常使用、延长使用年限,需要以理论为指导,科学制定检修计划,结合设备实际情况合理应用诊断技术。     

综合医院电气节能技术措施探讨

以降低A综合医院电能损耗为目的,通过测算空调系统、照明系统、医疗器械等用电负荷,分析医院电耗现状,探讨综合医院电气节能技术措施,有针对性采取更换LED照明、新增电梯电能回馈装置、更换新型节能变压器等措施。通过节电前后的数据对比分析,取得了较好的节电效果,为其他医院电气系统安全可靠、节能经济地运行提供参考。     

A compromise between piezoelectricity and transparency in KNN-based ceramics: The dual functions of Li2O addition

Transparent ceramics with good electrical performance have recently drawn broad interest as promising multifunctional materials. Here, we report that a superior transmittance (T = 75 % at 2000 nm) and good piezoelectricity (d₃₃ ∼ 150 pC/N) can be simultaneously realized in 0.93K_0.5Na_0.5NbO₃-0.07SrZrO₃ (KNN-SZ) ceramics by Li₂O regulation. The effect of Li₂O regulation has two parts: first, the presence of Li₂O facilitates the grain growth of KNN-SZ, considering that it melts at a relatively low temperature as a proper sintering aid; second, the introduced Li⁺ causes local lattice distortion, resulting in the coexistence of orthogonal and tetragonal (O–T) phases. The enlarged grains reduce the light scattering by grain boundaries for a higher optical transmittance; meanwhile, large grains stand as a prerequisite for the macroscopic domain structure favoured for decent piezoelectricity, which could also be partly caused by the coexistence of O–T phases. We believe that these findings might make KNN-based ceramics a preferable candidate for optoelectronic devices.     

Optimized dual-function varistor-capacitor ceramics of core-shell structured xBi2/3Cu3Ti4O12/(1-x)CaCu3Ti4O12 composites

xBi_2/3Cu₃Ti₄O₁₂/(1-x)CaCu₃Ti₄O₁₂ composites were prepared by traditional solid-state reaction method. Extremely high nonlinear coefficient of 25 and breakdown field of 18.92 kV·cm⁻¹ were obtained in small current range of 0.1−1 mA·cm^-2. In addition, reduced dielectric loss of 0.055 was achieved with high dielectric constant of 1369. Optimized nonlinear and dielectric properties were integrated to make the composites a promising dual-function varistor-capacitor candidate. Microstructure analysis discovered two areas with various Bi/Ca ratio, designated as Bi-H and Bi-L respectively. It was found that the maximum ratio of Bi-H/Bi-L heterogeneous interface corresponded to optimized nonlinear and dielectric performance, which was associated with elevated potential barrier height and huge grain boundary resistance. Combined with relaxation analysis, a core-shell structure was proposed to elaborate microstructure evolution in xBi_2/3Cu₃Ti₄O₁₂/(1-x)CaCu₃Ti₄O₁₂ composite. According to the core-shell model, variation of heterogeneous interface was illustrated on how to influence nonlinear properties, which was well fitted to experimental results.     

Low temperature heat capacity measurements of β-Si3N4 and γ-Si3N4: Determination of the equilibrium phase boundary between β-Si3N4 and γ-Si3N4

Isobaric heat capacities of β-Si₃N₄ and γ-Si₃N₄ were measured at temperatures between 1.8 and 309.9 K with a thermal relaxation method. The measured heat capacities of γ-Si₃N₄ are smaller than those of β-Si₃N₄ in this temperature range. Using these data, we determined the standard entropies of β-Si₃N₄ and γ-Si₃N₄ to be 62.30 J·mol⁻¹ K⁻¹ and 51.79 J·mol⁻¹ K⁻¹, respectively. The equilibrium phase boundary between β-Si₃N₄ and γ-Si₃N₄ was calculated using these values and thermodynamic parameters reported in previous studies. The obtained equilibrium phase transition pressure at 2000 K is 11.4 GPa. It is lower than the experimental pressures at which γ-Si₃N₄ was synthesized in previous studies. The calculated Clapeyron slope at this temperature is 0.6 MPa K⁻¹, which is consistent with those of theoretical studies.     

2D numerical study on the deflection of thin steel plate subjected to gaseous detonation wave interaction

An elaborate numerical study with a validated LS-DYNA® immersed boundary method fluid-solid interaction code is used to characterize the influence of pre-detonation pressure, ignition point location and time duration on plastic deformation of thin steel plates subjected to hydrogen-oxygen gaseous detonation. Simulation relies on the modeling of detonation by chemical reaction kinetic and its propagation by conservative element solution element solver. Immersed boundary method is used to simulate the interface motion between the detonating gas and the deforming plate to facilitate the assessment of fluid pressure distribution on the plate surface. The numerical tool relates the pressure distribution and gaseous detonation parameters to the plate macroscopic deformation by employing multi-species reactive Euler's equations for the gas and assuming a Johnson-Cook material model for the plate. The numerical model simulated the experimental tests and a good agreement between them was obtained where specific features of gas detonation-driven forming were considered. With the confidence of the validation, the numerical model investigated the effects of different parameters such as the gaseous mixture initial temperature and combustion cylinder longitudinal capacity on overpressure-time history and strain-time history. It is demonstrated that the larger longitudinal capacity of combustion cylinder and more distant ignition point location have a great influence on increasing the detonation wave intensity. Eventually, the rate-dependent Johnson-Cook failure criterion was used to assess the failure state of plate under high-intensity detonations.